Eolian
Sep 24, 03:25 AM
Hi, everyone.
I'm new iPod Touches, though I've had some other iPods over the years. I'm a teacher, and decided that I'd use the Bento app on it to keep track of my students' progress at school. My niece rolled her eyes and informed me that I'd need a case and screen protector. So, I went to Best Buy today and got the Griffin Gloss and the Invisishield. I put on the case, which seems to work fine. Then I opened the shield and got a good look at it. It immediately occurred to me that I'd probably need to take off the case, put the shield on, then put the case back on. However, the case--which consists of two pieces of hard plastic that intersect in the middle after installation--won't budge. I'm sure I could get it off, but I'm not sure I could do so without doing significant damage to the case. These things are supposed to be removable, aren't they? Also, would it be a big deal not to have a screen protector on it? I'm going to be using it a lot in multiple locations. It's probably going to get bounced around on a regular basis.
Thanks,
Pete
The Griffin hardshell will come apart without damage, it is just VERY :cool: snuggly fit together.
I got a fingernail into the seam, then some steady force pulling the lower section straight back did the trick. It's a nice case with a beautiful fit.
I did not opt for a screen protector, no second thoughts. I've found these often get pretty mucked up themselves on other devices, and that by itself would be a shortcoming on this amazing display.
For a lot of traveling, maybe an inexpensive slip case? Best luck.
I'm new iPod Touches, though I've had some other iPods over the years. I'm a teacher, and decided that I'd use the Bento app on it to keep track of my students' progress at school. My niece rolled her eyes and informed me that I'd need a case and screen protector. So, I went to Best Buy today and got the Griffin Gloss and the Invisishield. I put on the case, which seems to work fine. Then I opened the shield and got a good look at it. It immediately occurred to me that I'd probably need to take off the case, put the shield on, then put the case back on. However, the case--which consists of two pieces of hard plastic that intersect in the middle after installation--won't budge. I'm sure I could get it off, but I'm not sure I could do so without doing significant damage to the case. These things are supposed to be removable, aren't they? Also, would it be a big deal not to have a screen protector on it? I'm going to be using it a lot in multiple locations. It's probably going to get bounced around on a regular basis.
Thanks,
Pete
The Griffin hardshell will come apart without damage, it is just VERY :cool: snuggly fit together.
I got a fingernail into the seam, then some steady force pulling the lower section straight back did the trick. It's a nice case with a beautiful fit.
I did not opt for a screen protector, no second thoughts. I've found these often get pretty mucked up themselves on other devices, and that by itself would be a shortcoming on this amazing display.
For a lot of traveling, maybe an inexpensive slip case? Best luck.
Built
Apr 2, 11:58 PM
Ummm - the reason probably is shown on the 1400 post "light bleed" thread. People WANT the thing bad so they don't "return" it... they get it "swapped". Quite a few people over there are on their 4th to 5th swap
(which boggles my mind frankly) in a search to get one with no bleed.
They all seem to have it to varying degrees but I have to hand it to Apple for (so far) not claiming this is "in spec" to shut down all these
"swaps".
Apple probably lists all these as "exchanges" and therefore they don't count as "returns". Makes the customer happy and makes them look good in the press. Everybody wins.
Towards the end of the huge thread over at Apple.com people are being told the same thing from the reps when they call... that Apple "is looking into the qc issue on this batch of iPads and hopes to resolve the issue". That's good news for everybody.
...but all the Apple apologists...so quick to jump to Apple's defense...say that there is no such problem. :D
You are dead on correct. Many people do not want to endure the wait for a new one if they return it...Many are waiting to see if Apple can resolve the issue in a future production batch. What good is exchanging if the new one is going to have the same, or worse, problem
I love Apple products but I am always entertained by the rabid zeal of the delusional Apple apologists who insist the company can do no wrong...OR...they simply ignore the common, and obvious, flaws in the Apple product they buy, trying to convince themselves that they have the only "good" one...which on some subconscious level they need to tell themselves so they can believe they are "special" somehow.
(which boggles my mind frankly) in a search to get one with no bleed.
They all seem to have it to varying degrees but I have to hand it to Apple for (so far) not claiming this is "in spec" to shut down all these
"swaps".
Apple probably lists all these as "exchanges" and therefore they don't count as "returns". Makes the customer happy and makes them look good in the press. Everybody wins.
Towards the end of the huge thread over at Apple.com people are being told the same thing from the reps when they call... that Apple "is looking into the qc issue on this batch of iPads and hopes to resolve the issue". That's good news for everybody.
...but all the Apple apologists...so quick to jump to Apple's defense...say that there is no such problem. :D
You are dead on correct. Many people do not want to endure the wait for a new one if they return it...Many are waiting to see if Apple can resolve the issue in a future production batch. What good is exchanging if the new one is going to have the same, or worse, problem
I love Apple products but I am always entertained by the rabid zeal of the delusional Apple apologists who insist the company can do no wrong...OR...they simply ignore the common, and obvious, flaws in the Apple product they buy, trying to convince themselves that they have the only "good" one...which on some subconscious level they need to tell themselves so they can believe they are "special" somehow.
Full of Win
Apr 19, 10:55 AM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5)
One step closer to a MBA refresh.
One step closer to a MBA refresh.
Eraserhead
Nov 27, 01:30 PM
I think Apple will specifically NOT make a 17" Monitor as Digitimes are so astonishingly innaccurate :rolleyes:.
Schizo
Jan 26, 07:44 AM
Including, I noticed, my own on the 2009 thread, although I wasn't a member of this forum at the time.
A mate of mine just emailed me thus:
"Mate,
I�m just searching through google photos (got some down time at lunch for once!) and I came across this .... http://forums.macrumors.com/showthread.php?t=627003&page=4 .... Your car but considering the individual posted also claims to own a Corsa and Rover HSE it doesn�t sound like you at all? looks like someone wannabe claiming ownership of your life mate :O Scary part is next page the same person posts again and shows a pic of your missus car!"
Naturally I had a look and sure enough, my car (and the wife's) in pictures no doubt stolen from the Audi A5 owners' club site.
Thought I'd let you know in case anyone is thinking of placing trust in this individual ('Mac.') - you may want to think twice.
I'm actually pretty glad we don't have either car any more - bit scary to see what some people will actually do!
A mate of mine just emailed me thus:
"Mate,
I�m just searching through google photos (got some down time at lunch for once!) and I came across this .... http://forums.macrumors.com/showthread.php?t=627003&page=4 .... Your car but considering the individual posted also claims to own a Corsa and Rover HSE it doesn�t sound like you at all? looks like someone wannabe claiming ownership of your life mate :O Scary part is next page the same person posts again and shows a pic of your missus car!"
Naturally I had a look and sure enough, my car (and the wife's) in pictures no doubt stolen from the Audi A5 owners' club site.
Thought I'd let you know in case anyone is thinking of placing trust in this individual ('Mac.') - you may want to think twice.
I'm actually pretty glad we don't have either car any more - bit scary to see what some people will actually do!
MacFanJeff
Mar 26, 04:00 AM
While professionals can say bye bye to nVidia's CUDA processing and PhysX.
:-(
ATI/AMD is doing what they can, developing an OpenCL driven bullet physics port to Maya but they always seem to be one step behind - announcing a plugin for Maya 2011 in the same week that Autodesk announced that nVidia Physx is being integrated directly into Maya 2012 with real time physx cloth deformation, rigid body dynamics, and physx accelerated calculations for DMM destruction.
On the windows side, 3ds Max is getting Physx integration, too. Open CL is cool but it's got some ground to make up in the application world.
If you refer to my prior post in this thread, I too am a professional 3D content creator. As things stand currently, all software I use take better advantage of nVidia compared to ATI. Most of what I use prefer "CUDA" cores and eventually more "PhysX" integration.
This is why I can no longer use Apple at all in my work, I can not come close to getting what I can from a pair of 580 GTX factory OC cards in SLI for a Mac Pro. In fact, most of what Apple offers is still behind the curve.
It is the single area where Apple fails and I know from attending conferences that most of the big names simply don't care because they do not have enough users on that platform to matter. Don't get me wrong, I still think Apple is great for most all other areas and I recommend them to family and friends. But for the 3D professional market, there is no way I can use Apple without making many sacrifices.
:-(
ATI/AMD is doing what they can, developing an OpenCL driven bullet physics port to Maya but they always seem to be one step behind - announcing a plugin for Maya 2011 in the same week that Autodesk announced that nVidia Physx is being integrated directly into Maya 2012 with real time physx cloth deformation, rigid body dynamics, and physx accelerated calculations for DMM destruction.
On the windows side, 3ds Max is getting Physx integration, too. Open CL is cool but it's got some ground to make up in the application world.
If you refer to my prior post in this thread, I too am a professional 3D content creator. As things stand currently, all software I use take better advantage of nVidia compared to ATI. Most of what I use prefer "CUDA" cores and eventually more "PhysX" integration.
This is why I can no longer use Apple at all in my work, I can not come close to getting what I can from a pair of 580 GTX factory OC cards in SLI for a Mac Pro. In fact, most of what Apple offers is still behind the curve.
It is the single area where Apple fails and I know from attending conferences that most of the big names simply don't care because they do not have enough users on that platform to matter. Don't get me wrong, I still think Apple is great for most all other areas and I recommend them to family and friends. But for the 3D professional market, there is no way I can use Apple without making many sacrifices.
hvfsl
Jul 14, 07:42 AM
I would like to point out a few things:
-Of course BluRay burners will be optional in Macs (until they cost around the same as DVD writers cost now)
-A BluRay writer will allow people to record movies on their HD camera (Sony and co already have a few pro-sumer models out) and then burn them in HD to BD-R using upcoming versions of iDVD and DVDstudio.
-You will be able to watch HD movies on your Mac.
Also I personally want BluRay to win over HD-DVD because it will mean that we won't need another new format for many years to come. BluRay has plans for 200GB disks.
HD-DVD may be fine for current HD movies, but what happens when we move to even higher resolutions and to 3D (Lucas and Jackson both have plans to release their movies in 3D).
-Of course BluRay burners will be optional in Macs (until they cost around the same as DVD writers cost now)
-A BluRay writer will allow people to record movies on their HD camera (Sony and co already have a few pro-sumer models out) and then burn them in HD to BD-R using upcoming versions of iDVD and DVDstudio.
-You will be able to watch HD movies on your Mac.
Also I personally want BluRay to win over HD-DVD because it will mean that we won't need another new format for many years to come. BluRay has plans for 200GB disks.
HD-DVD may be fine for current HD movies, but what happens when we move to even higher resolutions and to 3D (Lucas and Jackson both have plans to release their movies in 3D).
archer75
May 3, 04:44 PM
The Quad i5 or i7?
The i7. I actually have an i7 920 in my PC but the sandy bridge is still a good upgrade.
The i7. I actually have an i7 920 in my PC but the sandy bridge is still a good upgrade.
TangoCharlie
Sep 1, 12:03 PM
I guess they plan to put the 2.93GHz Core 2 Extreme or 2.66GHz processor in it. IF they make the display height adjustable...i might consider it. Otherwise the MacPro remains the slated candidate for my desktop needs
No. They plan to stick in the 2, 2.16 and 2.33 GHz Merom CPU's in it.
But I agree... it does need a height adjustable stand.
No. They plan to stick in the 2, 2.16 and 2.33 GHz Merom CPU's in it.
But I agree... it does need a height adjustable stand.
mjteix
Mar 25, 07:02 PM
Intel's TDPs are not actual power consumed. So yes, the 130 W scenario still kicks.
Correct, the power consumed is less than any of the TDP ratings.
Then why "2x CPUs 130W rated. So thats 260W, right there."?
If the power consumption is less than the TDP, it should be: 2x CPUs 95W rated. So that's 190W max, anyway.
If you want an example of power consumption from a similar computer, go here (http://h18000.www1.hp.com/products/quickspecs/13277_na/13277_na.HTML). The maximum power consumption is 570W for 2x Xeon X5570 (TDP=2x95W), 12GB RAM, FX4800 gpu (TDP=150W), 2x 1TB HDD, ODD, Ethernet, on a 650W 80PLUS� BRONZE PSU.
If you change the gpu for one with a 300W TDP, and if the power consumption is still less than the TDP, then a 800W PSU would do the trick. No?
Correct, the power consumed is less than any of the TDP ratings.
Then why "2x CPUs 130W rated. So thats 260W, right there."?
If the power consumption is less than the TDP, it should be: 2x CPUs 95W rated. So that's 190W max, anyway.
If you want an example of power consumption from a similar computer, go here (http://h18000.www1.hp.com/products/quickspecs/13277_na/13277_na.HTML). The maximum power consumption is 570W for 2x Xeon X5570 (TDP=2x95W), 12GB RAM, FX4800 gpu (TDP=150W), 2x 1TB HDD, ODD, Ethernet, on a 650W 80PLUS� BRONZE PSU.
If you change the gpu for one with a 300W TDP, and if the power consumption is still less than the TDP, then a 800W PSU would do the trick. No?
tablo13
Sep 20, 08:02 PM
What was the checkout like? Did you have to go through their checkout? I'm always suspicious of those places, and am concerned that they're using unsecured special checkouts and/or are stealing identities. And I'm not usually a suspicious person.
I'm pretty sure they use the eBay's PayPal checkout. :rolleyes:
I'm pretty sure they use the eBay's PayPal checkout. :rolleyes:
chaosbunny
May 3, 12:54 AM
Might be nice for people who actually use the App Store.
BabyFaceMagee
Jan 12, 12:31 AM
Here is some info on the wireless power adaptor technlogy I mentioned previously that I believe will be incorporated into a new low power mac that does not ever need to be plugged in. There are two trains of thought. One is that it will be set atop a wireless power pad that will conduct the electricity a mere inch or two to 'charge' or power the mac without any cable or outside connectors and the other which has been demonstrated by a few other companies including involves electricity being sent through the air similar to a wireless signal, except the laptop actually charges without any wires at all - cordless electricity as it were.
Here's some links to some past posts discussing the technlogy.
http://www.tuaw.com/2007/02/16/rumors-docking-and-charging-by-induction/
http://www.louisgray.com/live/2007/02/its-time-to-make-power-wireless-and.html
Finally, a company called Powercast at www.powercastco.com demonstrated this wireless power transfer not too long ago by lighting a bulb up with absolutely no wires. Pretty cool and inevitable if you ask me.
This is what I'm guessing will be the hot new product - the MacAir - no cords. Power without wires.
BFM
Here's some links to some past posts discussing the technlogy.
http://www.tuaw.com/2007/02/16/rumors-docking-and-charging-by-induction/
http://www.louisgray.com/live/2007/02/its-time-to-make-power-wireless-and.html
Finally, a company called Powercast at www.powercastco.com demonstrated this wireless power transfer not too long ago by lighting a bulb up with absolutely no wires. Pretty cool and inevitable if you ask me.
This is what I'm guessing will be the hot new product - the MacAir - no cords. Power without wires.
BFM
KnightWRX
May 2, 06:13 PM
Never said anything about cooperative multi-tasking.
iOS is not cooperative multi-tasking. It's fully pre-emptive.
I know it is, unfortunately, the userspace APIs don't allow 3rd party apps to profit from that. You can't just write code and hope the process scheduler will happily deal with you (as any modern, pre-emptive OS scheduler does). No matter what, your apps gets sent messages to suspend itself and the frameworks are built in a way that if you don't intercept these to "background" certain tasks using a certain limited API to do so, the defaults kick in and you get sent to oblivion.
It's pre-emptive cooperative multi-tasking if you will. It's limiting. This is a "Truck" OS. I don't need limits on truck. If I wanted limits, I'd drive a car, to use the Steve analogy. ;)
I'm talking about intelligent pre-emptive multitasking with API's that allow the Apps to make intelligent decisions removing the burden from users to "clean up" after apps they have launched but aren't using.
Apps aren't intelligent (artificial intelligence ain't quite there yet). If I have apps open, there's a reason and I want them to stay open. I'm not CPU/memory limited enough to warrant dumping these to some kind of swap space and prevented from sitting in their idle loop, waiting on their input.
Taking control away from the user is in the end dumbing down the experience. This is what most folks are afraid of with all these features.
I'm talking about Apps that are, to the user, ALWAYS instantly available in exactly the same state that they left them in.
They can only be instantly available if they stay resident in RAM. If they are swapped out, then they need to be swapped back in.
iOS is not cooperative multi-tasking. It's fully pre-emptive.
I know it is, unfortunately, the userspace APIs don't allow 3rd party apps to profit from that. You can't just write code and hope the process scheduler will happily deal with you (as any modern, pre-emptive OS scheduler does). No matter what, your apps gets sent messages to suspend itself and the frameworks are built in a way that if you don't intercept these to "background" certain tasks using a certain limited API to do so, the defaults kick in and you get sent to oblivion.
It's pre-emptive cooperative multi-tasking if you will. It's limiting. This is a "Truck" OS. I don't need limits on truck. If I wanted limits, I'd drive a car, to use the Steve analogy. ;)
I'm talking about intelligent pre-emptive multitasking with API's that allow the Apps to make intelligent decisions removing the burden from users to "clean up" after apps they have launched but aren't using.
Apps aren't intelligent (artificial intelligence ain't quite there yet). If I have apps open, there's a reason and I want them to stay open. I'm not CPU/memory limited enough to warrant dumping these to some kind of swap space and prevented from sitting in their idle loop, waiting on their input.
Taking control away from the user is in the end dumbing down the experience. This is what most folks are afraid of with all these features.
I'm talking about Apps that are, to the user, ALWAYS instantly available in exactly the same state that they left them in.
They can only be instantly available if they stay resident in RAM. If they are swapped out, then they need to be swapped back in.
Sky Blue
Apr 2, 09:32 AM
Thus far, stability-wise, it is not too bad for a beta. A lot of the UI rendering errors from beta 1 have been ironed out. My bet would be that this will be a $29 upgrade, as it doesn't add much but rather refines what 10.6 started.
haha, no chance. Tons of new features here. I can see Apple charging less than $129 if they go the App Store route, but if boxed retail is released I'm sure it'll be $129.
haha, no chance. Tons of new features here. I can see Apple charging less than $129 if they go the App Store route, but if boxed retail is released I'm sure it'll be $129.
takao
Feb 24, 06:34 PM
The Koreans have been improving a great deal since they built my borther's 1998 Hyundai Accent (which I someday hope to convert into a rally car when it's served it's on-road purpose). I would say that many of the lates models from Korea equal or exceed the Japanese in quality.
true i think the mentioned Kia Cee'd is the prime example of a great korean car ... the problem though is that with it the price advantage also vanished ;)
and i nretroperspective the name change from Dewoo to Chevrolet really helped GM a lot, sales really have been picking on ... relativly
regarding japanese cars they somehow again managed to hit 2 homeruns in the stupid name department
the Mitsubishi iMiEV which in german is spoken out (translated) "iStink"
and the suzuki Kizashi which in austrian dialekt german sounds pretty close to " kiss...'lower backside' "
As for the Germans, I am a fan of many German cars and they have earned their reputation, but not all of their cars are great. I remember looking over the C-Class hatchback a few years ago and aside from the RWD and the badge it was inferior to a Golf IMO, and quite a bit more money. Same goes for the M-Class, or the BMW 318 and Z3. I think people often assume that the German cars are benchmarks, but not all of them are.
true that .. regarding german benchmark cars i would mention the Golf TDI, the Mercedes E250 Blu Efficiency CDI, the BMW M3 .. in their markets they are simply the best there is for different reasons:
the Golf TDI is defining a whole vehicle class for most of europe: "Golf Klasse", every new vehicle roughly the same size and hatchback layout gets compared to it
the E250 BE CDI: showing that a fuel saving vehicle doesn't need to be hideous and still can be a big saloon car driving from Barcelona to Stuttgart on a single tank
the M3: the sporty 4 door saloon car benchmark
true i think the mentioned Kia Cee'd is the prime example of a great korean car ... the problem though is that with it the price advantage also vanished ;)
and i nretroperspective the name change from Dewoo to Chevrolet really helped GM a lot, sales really have been picking on ... relativly
regarding japanese cars they somehow again managed to hit 2 homeruns in the stupid name department
the Mitsubishi iMiEV which in german is spoken out (translated) "iStink"
and the suzuki Kizashi which in austrian dialekt german sounds pretty close to " kiss...'lower backside' "
As for the Germans, I am a fan of many German cars and they have earned their reputation, but not all of their cars are great. I remember looking over the C-Class hatchback a few years ago and aside from the RWD and the badge it was inferior to a Golf IMO, and quite a bit more money. Same goes for the M-Class, or the BMW 318 and Z3. I think people often assume that the German cars are benchmarks, but not all of them are.
true that .. regarding german benchmark cars i would mention the Golf TDI, the Mercedes E250 Blu Efficiency CDI, the BMW M3 .. in their markets they are simply the best there is for different reasons:
the Golf TDI is defining a whole vehicle class for most of europe: "Golf Klasse", every new vehicle roughly the same size and hatchback layout gets compared to it
the E250 BE CDI: showing that a fuel saving vehicle doesn't need to be hideous and still can be a big saloon car driving from Barcelona to Stuttgart on a single tank
the M3: the sporty 4 door saloon car benchmark
KevanDual2.5
Sep 6, 08:56 AM
Maybe i am alone on this one....
I think the 24" iMac G5 is the beginning of the end of the G5 iMac. We all watched as the outstanding G4 iMac grew from a 15" to a 17" and finally to 20". While the stunning design remained the same, the 20" just didn't look as good as the 2 previous models. The proportions were wrong and it looked top-heavy.
I am sitting in front of an original 23" Apple Display (plastic rather than aluminium). The new iMac cannot be much smaller than it. I firmly believe that the 24" will be, and should be, as big as it gets. I just hope that heat doesn't become a problem with the Core 2 Duo chips else the G5 iMac may have to evolve into a new enclosure.
Anyone else have thoughts similar?
I think the 24" iMac G5 is the beginning of the end of the G5 iMac. We all watched as the outstanding G4 iMac grew from a 15" to a 17" and finally to 20". While the stunning design remained the same, the 20" just didn't look as good as the 2 previous models. The proportions were wrong and it looked top-heavy.
I am sitting in front of an original 23" Apple Display (plastic rather than aluminium). The new iMac cannot be much smaller than it. I firmly believe that the 24" will be, and should be, as big as it gets. I just hope that heat doesn't become a problem with the Core 2 Duo chips else the G5 iMac may have to evolve into a new enclosure.
Anyone else have thoughts similar?
kingtj
Sep 7, 02:24 PM
I thought this was a great idea too, except when I mull it over - I'm not so sure Apple will really go there. With the larger variety of Intel iMacs available now, it looks like Apple's really trying to build one for every possible home-user or small office user's need. I agree that it'd be nice to have an expandable, upgradable Mac with no display built-in that doesn't carry the price tag of the Mac Pro line -- but think about users like us who say that. We're in the minority of "power users" or "more advanced users". Apple has made it pretty clear that if you're in that category, they want you to invest in one of their "Pro" systems. Otherwise, they cater to folks who see their computer as an appliance or tool and just want something they can pretty much plug in and use. These customers are not interested or comfortable doing things like opening up a system and upgrading video cards.
The Mini is Apple's answer to any remaining "casual users" who throw a fit because they just want a new computer to plug into their existing keyboard, mouse, monitor, and maybe USB hub they bought before.....
The "void" you talk about in Apple's product line is one I *think* Apple leaves there willfully.
cmon apple. get a clue.
these little mini's are nice but not great. there is a real void in your product lineup.
we need something with like a intel conroe chip, larger case, the ability to put in a better graphics card, and the basics like more ram, bigger hard drive and stuff.
give us a bigger mid sized tower type computer.
we all don't want to buy something with a screen. nor do we want some tiny puny non-upgradeable thing like the mac mini.
give us better options.
The Mini is Apple's answer to any remaining "casual users" who throw a fit because they just want a new computer to plug into their existing keyboard, mouse, monitor, and maybe USB hub they bought before.....
The "void" you talk about in Apple's product line is one I *think* Apple leaves there willfully.
cmon apple. get a clue.
these little mini's are nice but not great. there is a real void in your product lineup.
we need something with like a intel conroe chip, larger case, the ability to put in a better graphics card, and the basics like more ram, bigger hard drive and stuff.
give us a bigger mid sized tower type computer.
we all don't want to buy something with a screen. nor do we want some tiny puny non-upgradeable thing like the mac mini.
give us better options.
EagerDragon
Jul 19, 08:12 PM
I'm about ready to buy a 20" iMac but I want the new OS. How long do I have to wait?
January best time to buy. New OS is pre-installed, no need to buy computer and OS.
Besides the iMac will either get Meron in about 2 weeks or will get Conroe. Wait!!!!! Get the new machine and new OS together. Just a few months.
January best time to buy. New OS is pre-installed, no need to buy computer and OS.
Besides the iMac will either get Meron in about 2 weeks or will get Conroe. Wait!!!!! Get the new machine and new OS together. Just a few months.
iJawn108
Aug 6, 11:03 PM
"... introducing the 30th anaversary mac retro" :p
physicsguy13
Apr 2, 08:54 PM
thousands of ipads being returned?! source?
what really happened is about 5-10 people unfortunately got a defective unit, then freaked out, and called all the news sites around, so they can tell the world how mad they were about there product, that they surly got a free replacement model.
Well I guess that I would be one of the 10 people because my iPad 2 has a light bleeding issue and I called AppleCare today about it. I was told that my serial number was part of a bad batch and they would replace my iPad without question but they could not guarantee a perfect unit at this time and that Apple is aware of the issue and is investigating it. I only talked to the guy for about one minute and was told that Apple was looking into this so I am guessing that more than 10 people have an issue.
what really happened is about 5-10 people unfortunately got a defective unit, then freaked out, and called all the news sites around, so they can tell the world how mad they were about there product, that they surly got a free replacement model.
Well I guess that I would be one of the 10 people because my iPad 2 has a light bleeding issue and I called AppleCare today about it. I was told that my serial number was part of a bad batch and they would replace my iPad without question but they could not guarantee a perfect unit at this time and that Apple is aware of the issue and is investigating it. I only talked to the guy for about one minute and was told that Apple was looking into this so I am guessing that more than 10 people have an issue.
rnelan7
Feb 28, 10:26 PM
Here is the College setup, I will eventually upgrade to the Logitech Performance wireless mouse. What is seen in the picture:
27" iMac
11.6" Macbook Air
Blackberry Tour
PS3 Slim
Xbox 360 Slim
Picture taken with iPhone 4
Through the door seen is my bathroom and right behind me is my bed and closets. Pretty cozy room but I think I have positioned everything to make the best of it.
EDIT: I just hooked my iMac up to my tv to play movies/shows etc. on but I ran into one problem. I cannot turn my iMac display off and keep my tv on. If anyone knows how to do this please let me know asap!
27" iMac
11.6" Macbook Air
Blackberry Tour
PS3 Slim
Xbox 360 Slim
Picture taken with iPhone 4
Through the door seen is my bathroom and right behind me is my bed and closets. Pretty cozy room but I think I have positioned everything to make the best of it.
EDIT: I just hooked my iMac up to my tv to play movies/shows etc. on but I ran into one problem. I cannot turn my iMac display off and keep my tv on. If anyone knows how to do this please let me know asap!
vand0576
Sep 1, 01:09 PM
Hmm... the problem with that line-up is that when consumers see the shiny new advert saying "Meet the new iMacs" they'll look at the clock speeds and say "What new iMacs?". I think it would be reasonable for Apple to offer...
17" iMac - $1,199 - 2 GHz, X1650 Pro 128 MB
20" iMac - $1,699 - 2.16 GHz, X1650 Pro 256 MB
23" iMac - $2,199 - 2.33 GHz, X1650 Pro 256 MB
I think EVERYONE's suggested prices are way too high, even for a chip upgrade. They'll want to do a cost comparison for these new machines the same way they did the Mac Pro. iMacs are still quite overpriced compared to similar desktops from other companies, even with monitors. Bring those prices down Apple, and you'll have a TON of "switchers" with these machines.
17" iMac - $1,199 - 2 GHz, X1650 Pro 128 MB
20" iMac - $1,699 - 2.16 GHz, X1650 Pro 256 MB
23" iMac - $2,199 - 2.33 GHz, X1650 Pro 256 MB
I think EVERYONE's suggested prices are way too high, even for a chip upgrade. They'll want to do a cost comparison for these new machines the same way they did the Mac Pro. iMacs are still quite overpriced compared to similar desktops from other companies, even with monitors. Bring those prices down Apple, and you'll have a TON of "switchers" with these machines.
xer98
Apr 3, 02:38 PM
A couple of weeks after the product. Most companies have to do it in the other order. Absolutely elegant (keep Coyote as your voice pure pleasure) you should also push some of your adds towards older folks. The interface is brilliant for older folks who do not understand computers. I am buying an iPad2 for my 75 years old mother.
No comments:
Post a Comment